Hi. How can we help?

Setting up your Epson TM-m30III (Bluetooth) for iPad

Front-shot-Epson .jpeg

What you need 

In order to set up your receipt printer, you'll first need to make sure you have the following: 

Epson TM-m30III

Front-shot-Epson .jpeg
Power cable Epson_Product_power_cord.jpeg

Paper roll




Paper rolls

Make sure you have 80mm receipt rolls. To load your receipt roll, open the latch on the top right of the printer, place the roll inside and pull some of the paper through before closing the lid.

Cash drawer (optional)

You may also wish to set up your cash drawer at the same time, to do this you'll need a specialized cash drawer cable. This is similar looking to an ethernet cable but is smaller on one end.

Setting up your TM-m30III for iPad

  1. Remove the back and bottom covers of your printer. 
  2. Connect the AC adapter to your printer.
  3. Connect the AC cable to the AC adapter and an electrical outlet.
  4. Attach the bottom and back covers to your printer.
  5. Turn on your printer.

The power LED light will stop blinking and become solid once your printer is ready.

Inserting a paper roll 

  1. To open the printer's cover, push the lever on the right-hand side of the cover away from you and lift the cover upwards.
  2. Insert the paper roll in the following orientation. While doing so, make sure the paper roll stays taut and doesn't unroll.
  3. Pull the paper out past the cutter at the front of the printer.
  4. Push the cover down to snap the lever shut. 

Establishing a Bluetooth connection with your iPad

  1. Open the Settings app on your iPad.
  2. Tap Bluetooth under General Settings.iPad-Bluetooth-On.png
  3. Ensure Bluetooth is turned on. The Bluetooth slider should be green and switched to the right. If the slider is to the left and in grey, tap again to ensure Bluetooth is on. 
  4. On the printer, open the roll paper cover, and then hold down the Feed button until the paper LED starts flashing, then release the button.
  5. Close the roll paper cover. A receipt starting with "Next Action" will then print.
  6. Once printed, press the Feed button once (less than one second), and then hold down the Feed button for at least one second. A status sheet will be printed and the printer will be ready for pairing.
  7. In your iPad Bluetooth settings, select the printer name that is printed on the status sheet from the list of connectable devices to pair it.

Connecting your TM-m30II to Retail POS

  1. Open the Retail POS app and tap the Menu icon (☰)
  2. Select Settings Hardware.
  3. Under Receipt printers, tap Add a printer.add-printer-hardware-settings-x.jpg
  4. A modal will display to add your printer. Tap Follow steps to connect and add a printer.Follow-steps-to-connect.png
  5. Perform a hardware self-test by following the on-screen instructions and tap Next.hardware-self-test-print.png
  6. Select your printer brand (Epson) and printer model (TM-m30III), then tap Next.TM-m30II-Choose-your-printer-model.png
  7. Select Bluetooth as the connection type and tap Next.Ethernet-Connection-type-ipad-x.png
  8. Follow the on-screen instructions (depending on connection type) and tap Add printer once completed.
  9. Confirm the printer you want to add by selecting it under connected printers and tap Next.
  10. Your printer is now added and paired with Retail POS. You can choose to rename your printer, perform a Test print, or tap Finish.Connected-printer-confirm-tm-m30.png

Printing a test receipt

Now that your Epson TM-m30III is installed you can start using it to print your receipts in Retail POS.

To perform a test print, follow the steps below:

  1. Tap the Menu icon (☰) to open the sidebar and select Sales history.Epson-TM88V-Sales-History.png
  2. Tap a sale to expand it.Epson-TM88V-Sales-History-Expand-Sale.png
  3. Tap Print receipt.Epson-TM88V-Sales-History-Expand-Sale-Print-Receipt.png
  4. Select the receipt template you’d like to use and tap Print.iPad-Test-Print-Sales-History-Template.PNG

Was this article helpful?